Home
Shop
Wishlist0

banner

SENIOR’S MEMBER DISCOUNT DAYS! SAVE 25% EACH TUESDAY

0740 384847

Recently Viewed

Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module

Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module

Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module
Key Features:
Max. Power Consumption 0.8W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Hot Pluggable SFP MSA Compliant
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
FS BOX – Support Real-time Configuration
Industrial Temperature Range -40°C to 85°C
Compliant to IEEE 802.3z Gigabit Ethernet
Class 1 FDA Laser Safety and RoHS Compliant

KSh7,000.00

Buy Now
Availability: In Stock
SKU:Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module,

Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module

  • Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module is used
  • The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft).
  • 1000BASE-SX SFP for multimode fiber only
  • The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on  μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.
  • 1000BASE-LX/LH SFP for both multimode and single-mode fibers
  • The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers.
  • 1000BASE-EX SFP for long-reach single-mode fibers
  • The 1000BASE-EX SFP operates on standard single-mode fiber-optic link spans of up to 40 km in length. A 5-dB inline optical attenuator should be inserted between the fiber-optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.
  • The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.
  • When shorter distances of Single-Mode Fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

Reviews

There are no reviews yet.

Be the first to review “Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart